Brand: CASIO
Category: Digital Camera
Document Type:
Language: EN
Manual for EX-FR10
Uploaded: Aug. 9, 2025, 11:41 p.m.
Shooting
The camera connects to the controller via Bluetooth®. You can attach it around your neck, mount it on a tripod, or rotate it 90 degrees for different shooting styles.
Interval Snapshot
Capture photos or videos at set intervals to document changes over time.
ART SHOT
Apply artistic effects to make ordinary subjects more novel.
Viewing
Highlight Photo
Automatically select and collage daily snapshot highlights.
Highlight Movie
Automatically select and create movies from daily snapshot and movie highlights.
Sharing
Wireless LAN Connection
Turn your smartphone into a remote controller, select files, and send them to your smartphone.
Troubleshooting and error codes
| Problem | Possible Cause and Recommended Action |
|---|---|
| Camera powers down during Self-timer countdown. | The battery may be dead. Charge the battery (page 18). |
| There is digital noise in images. | Sensitivity may have been increased automatically for a dark subject, which increases the chance of digital noise. Use a light or some other means to illuminate the subject. |
| A recorded image was not saved. |
1)Camera power may have been turned off before the save operation was complete, which will result in the image not being saved. If the battery indicator shows 2)You may have removed the memory card from the camera before the save operation was complete, which will result in the image not being saved. Do not remove the memory card before the save operation is complete. |
| Though available lighting is bright, the faces of people in the image are dark. | Not enough light is reaching the subjects. Adjust EV shift to the + side (page 47). |
| Subjects are too dark when shooting images in a seashore or ski area. | Sunlight reflected by water, sand, or snow, can cause underexposure of images. Adjust EV shift to the + side (page 47). |
| The image is out of focus during movie recording. |
1)Focusing may not be possible because the subject is outside the focus range. Shoot within the allowable range. 2) The lens may be dirty. Clean the lens (page 94). 3)Focus is fixed during movie recording, so the image can go out of focus if there is a big change in the distance between the camera and subject during recording. |
| Playback | |
| The camera will not enter the PLAY mode. | The PLAY mode cannot be entered while an Interval Shot operation is in progress. |
| The color of the playback image is different from what appears on the monitor screen when shooting. | Sunlight or light from another source may be shining directly into the lens when you are shooting. Position the camera so sunlight does not shine directly into the lens. |
| Images are not displayed. | This camera cannot display non-DCF images recorded onto a memory card using another digital camera. |
| Images cannot be rotated. | Snapshot recorded with another camera cannot be rotated. • Snapshots recorded with another camera |
| File Deletion | |
| A file cannot be deleted. | The file may be protected. A protected image cannot be deleted. |
| Wireless LAN | |
| I can't establish a wireless LAN connection. The wireless LAN connection is broken. |
1) The camera cannot connect with a smartphone if they are too far apart from each other. 2)The smartphone may be connected with another wireless LAN. Check the smartphone's Wi-Fi settings and confirm that the camera is selected for wireless LAN connection (page 62). 3)Connection may have been lost due to interference caused by a nearby microwave oven, cordless phone, or other wireless LAN device. Move the camera away from the device causing the problem. |
| I forgot my SSID and password. | On the camera, hold down [●] (Movie) as you hold down the shutter button and [] (Power) for about six seconds to return the SSID and password to their initial defaults. For information about the initial default SSID and password settings, see page 62. |
| Bluetooth wireless technology | |
| A connection cannot be established between the camera and controller. |
1) The camera cannot connect with a smartphone if they are too far apart from each other. 2)A Bluetooth connection cannot be established with the camera while it is connected to a smartphone by wireless LAN. Terminate the wireless LAN connection. 3) If the camera is connected to a computer, unplug the USB cable to terminate the connection. 4)If, you still cannot establish a connection, hold down the shutter buttons on the camera and controller as you hold down [] (Power) for about six seconds. This will start the pairing operation required for Bluetooth connection. |
| Other | |
| The wrong date and time are displayed, or the wrong date and time are being stored along with image data. | The date and time setting is off. Set the correct date and time (page 68). |
| The messages on the display are in the wrong language. | The wrong display language is selected. Change the display language setting (page 69). |
| Images cannot be transferred over a USB connection. |
1)The USB cable may not be connected securely to the camera. Check all connections. 2) If the camera is not turned on, turn it on. 3) Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer's USB port. |
| Language selection screen appears when the camera is turned on. |
1)You did not configure initial settings after purchasing the camera or the camera may have been left with a dead battery. Check the camera setup (pages 27, 68). 2) There may be a problem with the camera's memory data. If this is the case, perform the reset operation to initialize the camera's setup (page 70). After that, configure each setting. If the language selection screen does not re-appear when you turn the camera on, it means that the camera's memory management data has been restored. If the same message appears after you turn power back on, contact your retailer or a CASIO authorized service center. |
| There are various indicators and values on the monitor screen. | The monitor screen shows indicators and other information about shooting conditions and the image you are recording. You can touch the "DISP" on the main screen to select what information you want to include on the display (page 9). |
| Buttons are not responsive right after the power has been turned on. | With large capacity memory cards there is a delay after the power has been turned on before the buttons become responsive. |
| Images are not displayed. |
1)The camera is turned off. 2) There is no Bluetooth connection between the camera and controller (page 25). |
| Display Messages | |
| Battery is low. | This message appears when the camera or controller battery goes dead. |
| Card ERROR |
There is something wrong with the memory card. Turn off the camera, remove the memory card and then reload it into the camera. If this message re-appears when you turn the camera back on, format the memory card (page 69). IMPORTANT! • Formatting a memory card deletes all its files. Before formatting, try transferring recoverable files to a computer or some other storage device. |
| Could not save file because battery is low. | Camera's battery power is low, so an image file could not be saved. |
| Folder cannot be created. | You are trying to record a file while there are already 9999 files stored in the 999th folder. If you want to record more, delete files you no longer need (page 52). |
| Memory Full | Memory is full with images you recorded and/or files saved by editing operations. Delete files you no longer need (page 52). |
| SYSTEM ERROR | Your camera system is corrupted. Contact your retailer or a CASIO authorized service center. |
| There are no files. | There are no files in built-in memory or on the memory card. |
| This file cannot be played. | The file you are trying to access is corrupted or is a type that cannot be displayed by this camera. |
| Camera connection was lost. Power will turn off. | A Bluetooth connection between the camera and controller could not be established or maintained (page 111). |
| File could not be created. | A Highlight Photo or Highlight Movie could not be generated for some reason. |
| Overheating. Power will turn off. | The camera protection function may have activated because camera and/or controller temperature is too high. Turn off power and wait until the camera or controller cools down before trying to use it again. |
| The camera is hot. | Camera temperature is high and continued use may activate its protection function. It is recommended that you stop using the camera, turn it off, and wait until it cools down. |
| This function cannot be used. | This message will appear part way through an operation when you attempt to use a function that is not allowed in combination with another function. |
, charge the battery as soon as possible (page 18).