Brand: BOOSTER PAC
Category: Remote Starter
Document Type:
Language: EN
Manual for ES5000 - Troubleshooting and error codes + PDF Download
Uploaded: April 8, 2025, 1:58 p.m.
Manual Publish Date: 2006-06-01
Warranty Summary
Clore Automotive warrants the BOOSTER PAC ES5000 for one year against defects in material or workmanship.
Emergency Jump Starter:
- Use in well-ventilated area.
- Shield eyes, wear protective eyewear.
- Review manuals.
- Turn ignition off.
- Clamp positive (red +) to positive terminal.
- Clamp negative (black -) to vehicle frame.
- Ensure cables are clear of moving parts.
- Stay clear of batteries.
- Start vehicle.
- Disconnect negative (-) clamp first.
- Disconnect positive (+) clamp.
Alternative Power Supply:
- Plug power extension cord from Booster PAC to vehicle's 12V outlet to save vehicle memory during battery replacement.
- Ensure the chosen outlet is live when vehicle is OFF.
Troubleshooting and error codes
| Problem | Answer |
|---|---|
| 1 or 2 red lights on, charger plugged in for 24 hours, no change in lights. | Check charger to see if it is charging. Charger should be warm. |
| Charger works well but still no change in status of lights (yellow light is on). | Possible defective battery or faulty breaker. Test with 12V device. If it works, breaker is OK, battery is the problem. |
| All lights on when charger plugged in, but no lights when unplugged and test button pressed. | Your Booster PAC has a defective battery which must be replaced. |
| Booster PAC fully charged but has no power. | Check wire where it meets the jaw on the Booster PAC clamp. Ensure well crimped. |
| Clicking sound from inside when using 12V outlet. | Accessory drawing too many amps, causing circuit breaker to cycle. May be overload condition or short circuit in accessory. |