Brand: beko
Category: Television
Document Type: Manual
Language: EN
Manual for TV
Uploaded: April 20, 2026, 8:13 p.m.
- TV Setup: Follow on-screen prompts for initial setup including language, country, mode (Home or Store), and network connection (LAN or WLAN).
- Channel Tuning: Tune in digital (DVB-S, DVB-C, DVB-T) and analog channels using the TV's built-in tuners and the relevant antenna or cable connection.
- Basic Operations: Use the remote control to power the TV on/off, change channels, adjust volume, and access menus for settings and features.
- Smart Features: Connect to your home network to access Smart Inter@ctive TV applications, web browsing, and media sharing.
- Advanced Settings: Customize picture and sound settings, manage recordings, and utilize features like Electronic Program Guide (EPG) and Teletext.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
|---|---|---|
| Picture bright (noise), but no channel visible | Antenna cable | Is the antenna cable connected? |
| Low picture contrast | No TV program set | Start program search |
| Picture and/or sound distorted | Picture settings not correct | Adjust brightness, contrast, or color settings |
| Problem with the program | Test with another channel | |
| Ghost images, reflection | Other devices | Move devices away |
| Program settings | Automatic or manual program settings/fine tuning | |
| Antenna | Check antenna cable or system | |
| No color | Color intensity at minimum | Increase color intensity |
| TV norm setting (if available) | Select correct color norm | |
| Problem with the program | Test with another program | |
| Picture visible, but no sound | Problem with the program | Test with another program |
| Volume set to minimum | Increase volume/turn on | |
| No or distorted teletext | Problem with the program | Test with another program |
| Remote control not working | Signal too weak | Check antenna system |
| Interference between remote and device | Point remote at TV | |
| Battery problem | Check and replace batteries if necessary | |
| Undefined operating state | Turn off TV via power switch for two minutes | |
| Picture too dark in PC mode | Incorrect PC resolution and refresh rate settings | Adjust PC settings (e.g., Resolution 1280 x 768, refresh rate 60 Hz) |