Brand: beko
Category: Dryer
Document Type: Manual
Language: EN
Manual for DTLCE80051W
Uploaded: April 20, 2026, 7:52 p.m.
Warranty Information
The standard guarantee is for twelve (12) months unless Beko plc agrees to extend it in writing.
1. Preparation: Ensure laundry is suitable for drying, check garment tags, and prepare laundry by emptying pockets, fastening zippers, and turning garments with metal accessories inside out. Sort laundry by type and thickness. Spin laundry at the highest speed possible.
2. Loading: Open the loading door, place laundry inside without jamming, and push the door closed.
3. Program Selection: Turn the On/Off/Programme selection knob to turn on the machine and select the desired program. Press the Start/Pause button to begin.
4. During Operation: Avoid opening the door unless necessary. If adding or removing laundry, press Start/Pause to enter stand-by mode, then open and close the door, and press Start/Pause again.
5. Cancelling/Changing Program: Turn the On/Off/Cancel knob to cancel. To change a program, turn the knob to select the new program and press Start/Pause.
6. End of Program: The machine will signal the end. Remove laundry promptly to prevent wrinkling. Turn the machine off by turning the knob to the Off position.
7. Maintenance: Clean the lint filter after each use, clean the sensors, drain the water tank, and clean the condenser periodically.
2. Loading: Open the loading door, place laundry inside without jamming, and push the door closed.
3. Program Selection: Turn the On/Off/Programme selection knob to turn on the machine and select the desired program. Press the Start/Pause button to begin.
4. During Operation: Avoid opening the door unless necessary. If adding or removing laundry, press Start/Pause to enter stand-by mode, then open and close the door, and press Start/Pause again.
5. Cancelling/Changing Program: Turn the On/Off/Cancel knob to cancel. To change a program, turn the knob to select the new program and press Start/Pause.
6. End of Program: The machine will signal the end. Remove laundry promptly to prevent wrinkling. Turn the machine off by turning the knob to the Off position.
7. Maintenance: Clean the lint filter after each use, clean the sensors, drain the water tank, and clean the condenser periodically.
Troubleshooting and error codes
| Problem | Possible Cause | Solution |
| Drying operation takes too long. | Fibre filter pores might be clogged. | Wash the filter with warm water. |
| Filter drawer might be clogged. (for heat pump models) | Clean the sponge and filter cloth in the filter drawer. | |
| Condenser might be blocked. (for condenser models) | Wash the condenser. | |
| Ventilation grills are closed. | Remove any objects blocking the grills. | |
| Inadequate ventilation (area too small). | Open doors/windows to reduce room temperature. | |
| Lime layer on sensors. | Clean the humidity or temperature sensors. | |
| Excessive amount of laundry loaded. | Do not load excessively. | |
| Laundry not wrung adequately. | Perform higher speed wringing on the washing machine. | |
| Clothes come out damp after drying. | Unsuitable program used. | Check maintenance labels and select a suitable program or use time programs. |
| Fibre filter pores might be clogged. | Wash the filter with warm water. | |
| Condenser might be blocked. (for condenser models) | Wash the condenser. | |
| Filter drawer might be clogged. (for heat pump models) | Clean the sponge and filter cloth in the filter drawer. | |
| Excessive amount of laundry loaded. | Do not load excessively. | |
| Laundry not wrung adequately. | Perform higher speed wringing on the washing machine. | |
| Drying machine does not turn on or program cannot be started. | Power plug is unplugged. | Ensure the power cord is plugged in. |
| Loading door is open. | Ensure the loading door is properly closed. | |
| Program not set or Start/Stand-by button not pressed. | Set the program and press Start/Stand-by. | |
| Child lock is activated. | Turn off the child lock. | |
| Program terminated prematurely. | Loading door not closed completely. | Push the loading door until it closes. |
| Power outage. | Press Start/Stand-by button to restart. | |
| Water tank is full. | Empty the water tank. | |
| Clothes have shrunk, hardened or spoiled. | Unsuitable program used. | Check maintenance labels and select a suitable program. |
| Lighting inside the drying machine does not turn on. (for models with a lamp) | Drying machine not turned on or program not selected. | Ensure the machine is turned on. |
| Lamp malfunctioning. | Contact Authorized Service to replace the lamp. | |
| Filter cleaning warning symbol/LED is on/flashing. | Fibre filter not cleaned. | Clean the filter. |
| Filter slot clogged with lints. | Clean the filter slot. | |
| Fluff layer on lint filter pores. | Wash the filter with warm water. | |
| Condenser might be blocked. (for condenser models) | Wash the condenser. | |
| Water drips from the loading door. | Fibres gathered on inner surfaces. | Clean inner surfaces of the loading door and gasket. |
| Loading door opens by itself. | Loading door not closed completely. | Push the loading door until it closes. |
| Water tank warning symbol/led is on/flashing. | Water tank may be full. | Empty the water tank. |
| Water discharge hose collapsed. | Check the hose if connected directly to the water drain. | |
| Steam symbol is flashing. (for steam function models) | Steam tank may be empty. | Fill the steam tank with distilled or condensed water. |
| Steam programs do not start. (for steam function models) | Steam tank may be empty. | Fill the steam tank until the steam icon goes off. |
| Wrinkles not removed with wrinkle removing program. (for steam function models) | Excess amount of laundry. | Place specified amount of laundry. |
| Steam application time selected at low level. | Choose a program with high steam amount. | |
| Laundry left in machine too long after program. | Remove laundry immediately after program completion. | |
| Laundry odour not lessened with odour removal program. | Excess amount of laundry. | Place specified amount of laundry. |
| Steam application time selected at low level. | Choose a program with high steam amount. |