Brand: beko
Category: Air Conditioner
Document Type: Manual
Language: EN
Manual for 30925
Uploaded: April 20, 2026, 7:47 p.m.
Warranty Information
The product is covered by a 3-year warranty for material, workmanship, and manufacturing errors, provided it's used according to the manual.
Operation Summary
This manual covers the operation, maintenance, and troubleshooting of your Beko air conditioner. Key operations include:
- Mode Selection: Choose between Cooling, Heating, Auto Changeover, Dehumidification, and Fan modes.
- Temperature and Fan Speed Adjustment: Control the desired room temperature and fan speed for optimal comfort.
- Air Flow Direction: Adjust vertical and horizontal louvers to direct airflow.
- Timers: Set On/Off timers for automatic operation.
- Special Functions: Utilize features like Jet Mode for rapid temperature changes, Sleep Function for quiet operation, Energy Display, Light Off, Soft Air, and Energy Control for power saving.
- Maintenance: Regular cleaning of air filters is crucial for performance.
- Troubleshooting: Provides solutions for common issues like abnormal smells, water leaks, and operational problems.
Always refer to the safety instructions before operating the appliance.
Troubleshooting and error codes
| Problem | Possible Causes | Corrective Action |
|---|---|---|
| The air conditioner does not work normally. | Burning smell and strange sounds are coming from the unit. | • Turn off the air conditioner, switch OFF, or disconnect the power supply, and contact the service center. |
| Water leaks from the indoor unit even when the humidity level is low. | ||
| The power cable is damaged or it is generating excessive heat. | ||
| The air conditioner does not work. | The air conditioner is unplugged. | • Check whether the power cord is plugged into the outlet or the power isolators are switched on. |
| A fuse exploded, or the power supply is blocked. | ||
| A power failure has occurred. | ||
| The voltage is too high or too low. | ||
| The air conditioner was turned off automatically at a preset time. | ||
| The battery setting in the remote controller is incorrect. | ||
| The air conditioner does not emit cool air. | Air is not circulating properly. | • Make sure that there are no curtains, blinds, or pieces of furniture blocking the front of the air conditioner. |
| The air filter is dirty. | ||
| The room temperature is too high. | ||
| Cold air is escaping from the room. | ||
| The desired temperature is higher than the current temperature. | ||
| There is a heating source nearby. | ||
| Fan Mode is selected. | ||
| The fan speed cannot be adjusted. | The Jet Mode, or Auto Operation Mode is selected. | • In some operation modes, you cannot adjust the fan speed. Select an operation mode in which you can adjust the fan speed. |
| The temperature cannot be adjusted. | The Fan Mode or Jet Mode is selected. | • In some operation modes, you cannot adjust the temperature. Select an operation mode in which you can adjust the temperature. |
| The air conditioner stops during operation. | The Timer Function may have timed out, which turns the unit off. | • Check the timer settings. |
| A power failure has occurred during operation. | ||
| The indoor unit is still operating even when the unit has been turned off. | ||
| The Auto Clean function is being operated. | ||
| Water leaks from the outdoor unit. | In the heating operations, condensed water drops from the heat exchanger. | • This symptom requires installing a drain hose under the base pan. Contact the installer. |
| There is noise or vibration. | A clicking sound can be heard when the unit starts or stops due to movement of the reversing valve. | • These are normal symptoms. The noise will stop. |
| Creaking sound: The plastic parts of the indoor unit creak when they shrink or expand due to sudden temperature changes. | ||
| Flowing or Blowing sound: This is the flow of refrigerant through the air conditioner. | ||
| Odors (such as cigarette smoke) may be absorbed into the indoor unit and discharged with airflow. | ||
| The air conditioner does not emit warm air. | When Heating Mode starts, the vane is almost closed, and no air comes out, even though the outdoor unit is operating. | • This symptom is normal. Please wait until the unit has generated enough warm air to blow through the indoor unit. |
| The outdoor unit is in Defrosting Mode. | ||
| Outside temperature is too low. |