Manual for T65170AV

Manual for T65170AV

Brand: AEG

Category: Tumble Dryer

Document Type: Manual

Language: EN

Uploaded: April 20, 2026, 7:58 p.m.

Warranty Information

Warranty details are not explicitly mentioned, refer to warranty card for specific duration.

Basic Operation of Your Tumble Dryer

Before First Use: Clean the drum with a moist cloth.

Starting a Programme:

  1. Prepare and load laundry. Ensure no items are caught in the door seal.
  2. Select the correct programme and options using the programme knob and touch buttons.
  3. Press the Start/Pause button. The programme begins.

Using Delay Start:

  1. Set programme and options.
  2. Press the Delay Start button repeatedly to choose a delay of 3, 6, or 9 hours.
  3. Press Start/Pause.

At the End of the Programme: The appliance enters a crease guard phase for 30 minutes. You can remove laundry before this is complete. Always clean the filter after each cycle.

Stand-by Function: The appliance automatically deactivates after 5 minutes of inactivity or after the programme ends to save energy.

Troubleshooting and error codes

Problem Possible solution
You cannot activate the appliance. Make sure that the mains plug is connected to the mains socket.
Check fuse in fuse box (domestic installation).
The programme does not start. Press Start/Pause.
Make sure that the appliance door is closed.
The appliance door does not close. Make sure that the installation of the filter is correct.
Make sure that the laundry does not catch between the appliance door and the rubber seal.
The display shows a long programme duration. 1) Make sure that the weight of the laundry is applicable to the duration of the programme.
Make sure that the filter is clean.
The laundry is too wet. Spin the laundry in the washing machine again.
Make sure that the room temperature is not too warm.
The display shows a short programme duration. Set the Time Drying or the Extra Dry programme.
The display shows Err2). If you want to set a new programme, deactivate and activate the appliance.
The display shows (e.g. E51)2). Make sure that the options are applicable to the programme.
Deactivate and activate the appliance. Start a new programme. If the problem occurs again, contact the Service.
Privacy Policy