Brand: AEG
Category: Power Tools
Document Type: Manual
Language: EN
Manual for KH24IXE
Uploaded: Nov. 21, 2025, 7:02 p.m.
Warranty Information
AEG provides a 24-month warranty on this product, covering defects in materials and workmanship.
Product Overview
This manual provides instructions for the AEG KH24IXE rotary hammer drill. It details the product's features, safety precautions, and operational procedures.
Key Features:
- FIXTEC quick change
- Mode selector (hammer drilling, chiselling, drilling)
- Forward/reverse button
- Depth guide rod
- Auxiliary handle
Operation Summary:
The tool can be used for hammer drilling, chiselling, and drilling various materials like concrete, stone, wood, metal, and plastic. Ensure the correct mode is selected and the auxiliary handle is properly attached. Always follow safety instructions, wear protective equipment, and disconnect power before changing accessories or performing maintenance.
Troubleshooting and error codes
| Problem | Possible Cause | Remedy |
|---|---|---|
| The tool does not start. | - Power cord not connected. - Power supply faulty. |
- Check power cord connection. - Check power supply. |
| The insertion tool stalls. | - Tool overloaded. - Incorrect mode selected. - Tool is jammed in the workpiece. |
- Reduce load. - Select correct mode. - Switch off immediately, remove tool. |
| Excessive noise or vibration. | - Tool is not properly maintained. - Accessories are worn or damaged. |
- Perform maintenance as described in manual. - Replace accessories. |
| The tool overheats. | - Prolonged use without breaks. - Ventilation slots are blocked. |
- Take regular breaks. - Clean ventilation slots. |