Brand: AEG
Category: Power Supply
Document Type: Manual
Language: EN
Manual for Protect C 1000
Uploaded: April 20, 2026, 8:04 p.m.
Manual Publish Date: 2019
Warranty Information
AEG PS will not be liable for damages caused by not following the manual. Warranty is voided if unauthorized parts are used.
- Installation: Ensure proper placement for ventilation and stability. Connect to mains and consumers. Refer to specific connection diagrams.
- Operation: The USV provides uninterrupted power. It automatically charges batteries when mains is present.
- Maintenance: Regular visual checks of the unit, batteries, and fans are recommended every 6 months. Battery replacement should be done by qualified staff.
- Storage: Connect to mains before storage to ensure full charge. Avoid extreme temperatures. Recharge batteries every six months if stored.
- Disposal: Follow local regulations for electronic waste and batteries. Do not dispose of batteries with regular refuse.
Troubleshooting and error codes
| Fault/Alarm/Error Message | Possible Cause | Remedy |
|---|---|---|
| Overload | Connected load exceeds the rated power of the USV. | Disconnect some consumers. |
| Battery Low | Battery charge is critically low. | Check mains supply. If mains is present, battery may be old or faulty. Contact support. |
| Battery Fault | Internal battery error detected. | Contact support. |
| Bypass Activated | Internal fault or overload. | Check load and system status. If fault persists, contact support. |
| Fan Failure | Cooling fan malfunction. | Contact support. Ensure vents are clear. |