Brand: AEG
Category: Oven
Document Type: Manual
Language: EN
Manual for B8831-4
Uploaded: April 20, 2026, 8:13 p.m.
- Setting the time: Connect the appliance to the electrical supply. "Time" will flash. Use the '+' or '-' buttons to set the current time.
- Selecting an oven function: Press the On/Off button. Press the arrow buttons repeatedly until the desired function appears. A suggested temperature will display. The oven heats up automatically if the temperature is not changed within 5 seconds.
- Changing oven temperature: Press the '+' or '-' buttons to adjust the temperature in 5°C steps.
- Switching off the oven function: Press the arrow buttons repeatedly until no oven function is displayed.
- Switching off the appliance: Press the On/Off button.
- Speedcook: Pre-heats the oven quickly. Do not place food in the oven until Speedcook is completed.
- Meat probe: Used to switch off the oven when the internal temperature of the food reaches a set point.
- Clock Functions: Includes Countdown, Cook time, End time, and Time setting/adjustment.
Troubleshooting and error codes
| Problem | Possible cause | Remedy |
|---|---|---|
| The oven does not heat up | The oven has not been switched on | Switch the oven on |
| The clock has not been set | Set the current time on the clock | |
| The required settings have not been set | Check the settings | |
| Oven safety cut-out has been triggered | See Oven Safety Cut-out | |
| The house wiring fuse (in the fuse box) has tripped | Check fuse. If the fuses trip several times, please call a qualified electrician | |
| The oven lighting is not operating | The oven light bulb is faulty | Replace oven bulb |
| The oven is not heating up. Time is lit. | Demo mode is on. | Keep Selection button pressed for 2 seconds, then within 2 seconds press and hold Selection and buttons for 2 seconds |
| F11 appears in the clock display | The meat probe has short circuited or the plug of the meat probe is not firmly in position in the socket | Insert the plug of the meat probe as far as it will go into the socket on the side wall of the oven |
| An error code not listed above appears in the time display | Fault in the electronics | Switch off the appliance via the house fuse or the safety switch in the fuse box and switch it on again. If displayed again, please contact the Customer Care Department |