Brand: AEG
Category: Appliances
Document Type: Manual
Language: EN
Manual for CIB6646ABM
Uploaded: April 20, 2026, 8:01 p.m.
Hob - Daily Use
Operate the hob using sensor fields. Features include ON/OFF, Lock/Child Safety Device, Pause, Heat setting display, Timer, Hob²Hood, and PowerBoost. The hob has heat setting displays to show cooking zone status and automatic heat up functions.
Oven - Daily Use
Select oven functions like Off position, True Fan Cooking, Pizza Setting, Conventional Cooking, True Fan Cooking PLUS, Fast Grilling, Turbo Grilling, and Moist Fan Baking. Activate and deactivate the oven using function and temperature knobs. Functions like Cooling fan and Telescopic runners assist in operation and cleaning.
Troubleshooting and error codes
| Problem | Possible cause | Remedy |
|---|---|---|
| You cannot activate the appliance. | The appliance is not connected to an electrical supply or it is connected incorrectly. | Check if the appliance is correctly connected to the electrical supply. |
| You cannot activate the appliance. | The fuse is blown. | Make sure that the fuse is the cause of the malfunction. If the fuse is blown again and again, contact a qualified electrician. |
| You cannot activate or operate the hob. | You touched 2 or more sensor fields at the same time. | Touch only one sensor field. |
| You cannot activate or operate the hob. | There is water or fat stains on the control panel. | Clean the control panel. |
| An acoustic signal sounds and the hob deactivates. | You put something on one or more sensor fields. | Remove the object from the sensor fields. |
| An acoustic signal sounds when the hob is deactivated. | You put something on the sensor field ①. | Remove the object from the sensor field. |
| The hob deactivates. | (No cause listed in this excerpt) | (No remedy listed in this excerpt) |
| Residual heat indicator does not come on. | The zone is not hot because it operated only for a short time. | If the zone operated sufficiently long to be hot, speak to an Authorised Service Centre. |
| Automatic Heat Up function does not operate. | The zone is hot. | Let the zone become sufficiently cool. |
| Automatic Heat Up function does not operate. | The highest heat setting is set. | The highest heat setting has the same power as the function. |
| The heat setting changes between two levels. | Power management function operates. | Refer to "Hob - Daily use" chapter. |
| The sensor fields become hot. | The cookware is too large or you put it too near to the controls. | Put large cookware on the rear zones if possible. |
| There is no signal when you touch the panel sensor fields. | The signals are deactivated. | Activate the signals. Refer to "Hob - Daily use" chapter. |
| - comes on the hob display. | Automatic Switch Off operates. | Deactivate the hob and activate it again. |
| L comes on the hob display. | The Child Safety Device or the Lock function operates. | Refer to "Hob - Daily use" chapter. |
| F comes on the hob display. | There is no cookware on the zone. | Put cookware on the zone. |
| F comes on the hob display. | The cookware is incorrect. | Use the correct cookware. Refer to "Hob - Hints and tips" chapter. |
| F comes on the hob display. | The diameter of the bottom of the cookware is too small for the zone. | Use cookware with correct dimensions. Refer to "Hob - Hints and tips" chapter. |
| The oven does not heat up. | The oven is deactivated. | Activate the oven. |
| The oven does not heat up. | The clock is not set. | Set the clock. |
| The oven does not heat up. | The necessary settings are not set. | Make sure that the settings are correct. |
| The lamp does not operate. | The lamp is defective. | Replace the lamp. |
| The display shows "12.00". | There was a power cut. | Reset the clock. |
| Steam and condensation settle on the food and in the cavity of the oven. | You left the dish in the oven for too long. | Do not leave the dishes in the oven for longer than 15 - 20 minutes after the cooking process ends. |
| There is no good cooking performance using the True Fan Cooking PLUS function. | You did not fill the cavity embossment with water. | Refer to "Activating the True Fan Cooking PLUS function". |
| The water in the cavity embossment does not boil. | The temperature is too low. | Set the temperature at least to 110°C. Refer to "Hints and Tips" chapter. |
| The water comes out of the cavity embossment. | There is too much water in the cavity embossment. | Deactivate the oven and make sure that the appliance is cold. Wipe the water with a cloth or sponge. Add the correct amount of water to the cavity embossment. Refer to "Activating the True Fan Cooking PLUS function". |